Creating a custom Page Layout in SharePoint 2010 is not too different than creating a custom Page Layout in SharePoint 2007. However, the process of creating a SharePoint Solution Package has changed in Visual Studio 2010. This article will walk you through the steps.
First, open Visual Studio and create a new C# project, using the "Empty SharePoint Project" template, listed under the SharePoint 2010 project templates. For this example, we'll name our project "MyCustomPageLayout".
For this example, we'll be deploying our solution as a "Farm solution".
Click "Finish" to wire up your solution to your particular SharePoint site.
Content Type:
First thing to do is to define a content type.
I will call my Content Type: PicturePageContentType To do this: -
- Go to: Site Settings –> Site content types
- Next, click Create
In the following screen you insert information about the content type.
An import thing to do is let it inherit from the right parent content type.
This needs to be from the group: Publishing Content Types and the parent needs to be Page.
So far nothing special, next I added some non existing columns.
On the following page click Add from new site column.
Define in the screen the follows up the columns that you would like to add to the your content type (Page Layout in the end).
After you added all the columns you needed you can overview it when you’re looking at you content type. You’ll see that I added Page Content, this was one from the already existing site columns.
Note: If you added a from column to your page you cannot delete it:) If you want to get rid of it you need to delete the whole content type.
As with SharePoint 2007, we'll need to provision our Page Layouts to our SharePoint Site Collection Master Page Gallery by using a "Module" element. To do this, right click on the Project and say you want to add a new item. Select "Module" from the list of SharePoint 2010 items.
We'll name the Module "masterpage". When you create the new module, you'll see something like this:
By default, the module contains a sample text file you, so you can see how the Module deploys a file to SharePoint. However, we don't need it, so we'll delete Sample.txt. Next, we need to wire up our module to point to the URL of the Master Page Gallery, so we'll add a "Url" attribute to the Module node. Our Elements.xml file should now contain this XML:
Next, we're going to dop our new Page Layout file into the Module. To do thhis, we'll right-click on the "masterpage" module in the Visual Studio explorer and select "Add new item". We're once again presented with the "Add New Item" dialog. If we were to select "Application Page" from the SharePoint 2010 menu, we'd get a code-behind page in addition to our ASPX page, which we don't want. Since all we want to provision is markup (and not code), we're going to use a shortcut. Select the "General" node and select "Text File" from the list of items. However, name the file "MyCustomPageLayout.aspx". Add your Page Layout markup into your MyCustomPageLayout.aspx page.
You can do it how I do it, which is to create a new Page Layout in SharePoint designer,
Now, we need to add the code for PageLayout1.aspx. It's easier to design for the page first in SharePoint designer and then cop the code over.
So let's open SharePoint designer to the site you are developing on. Select "Page Layouts" under Site Objects.
In the ribbon click "New Page Layout". In the dialog box select Custom Content Types and ContentType1. Enter a URL Name and Title
In the Toolbox, under SharePointControls, Server Controls, Content Fields you should see PageContent and PageImage. Drag these two fields onto the page in the "PlaceHolderMain" content area so it looks like this Once again,
the FieldName values most likely won't match yours since that's a guid generated by the system. We will make two changes before we copy the code over to our project. Instead of leaving the guid for the field names we will change the FieldName to the actual names of the fields -- PageContent and PageImage so the code will be
Also, in the Page directive at the top of the page get rid of the following text: meta:webpartpageexpansion="full" meta:progid="SharePoint.WebPartPage.Document"
Take the code from the DesignPageLayout and copy it over to the PageLayout1.aspx page in your project.
then copying the code to Visual Studio. However, DO NOT FORGET to remove the attributes in the Page Directive at the top of the page that SharePoint Designer adds, that look like this:
If you don't forget to remove those items from the Page directive, SharePoint will think your pages have been customized, even though they were deployed via a Feature.
Next, we'll need to update the Module's Elements.xml file to tell SharePoint what to do with the new Page Layout.
The first thing we'll need to do is to update the "Url" property of the File element, by removing the "masterpage/" prefix fromt the Url. (Since we already specified in the Module element that we're deploying the Page Layout to the "masterpages" library, if we left the "masterpages/" part of the Url on the file, SharePoint would try to provision our Page Layout into a library called "masterpages" inside the existing "masterpages" library! We don't want that!) Your new File element should look like this:
Now we need to specify some properties for the Page Layout. These properties are identical to the kind of properties you would specify for a Page Layout in SharePoint 2007:
• The Title of the file in SharePoint
In our case, the file itself has a URL of MyCustomPageLayout.aspx, but we can also give the page a Title that will show up when the Page Layout is being selected by the content author, such as "My Custom Page Layout".
• The Content Type
All Page Layouts must inherit from the "Page Layout" content type (which we add using a Resource file value.)
• A Publishing Preview Image
The Publishing Preview Image is the image that shows up when a user picks that Page Layout from the Page Layout picker while they're creating a new page. In this example, we'll just point to the Article Page's preview image.
• The Publishing Associated Content Type
This is the Content Type that the Page Layout is representing, such as an "Article Page", "Welcome Page", etc. The value is a string representing a Lookup value that's a combination of the name of the Content Type and its unique identifier.
Our new File node will look like this:
That's it! We've built our Module.
Now, we're going to add a module for the Page Layout preview image. Right click on the project and add an additional Module element. Delete the "Sample.txt" file from it, and add your new preview image. (In our case, we'll call it CustomPageLayout.png".) Modify your module file so it looks like this:
We'll open up our MyCustomPageLayout feature, and give it a helpful name and description. Notice that you can graphically see that your Module is a part of this Feature, and you can even see which Module files will be provisioned when the Feature is activated.
The last thing we need to do is to make sure our Solution Package is getting configured correctly, to include our new Feature.
By default, the "Empty SharePoint Project" will create a DLL for you. If we just went ahead and deployed our Solution Package with the settings as-is, we would be deploying a DLL to the GAC. However, since our solution doesn't have any code in it, it would be a blank DLL. That's a bit messy, so let's avoid that. Click on the Project in your Solution Explorer, and look in the Properties Window. Change the "Include Assembly in Package" property to "False".
To deploy our new Solution Package to our Sandboxed Site, we'll go to the "Build" menu in Visual Studio, and select "Deploy MyCustomPageLayout".
This will assemble the Solution Package, deploy the Solution Package to the Sandbox, then activate the Sandboxed feature. If we browse to our Master Page Library, we'll now see our new Page Layout. Note that, unlike SharePoint 2007, our Page Layout will appear checked out by default, if we haven't modified any of the approval or check-out settings of the out of the Master Page Gallery. We'll need to check it in and approve it for it to be available to us.
Refrences: Links :
http://rburgundy.wordpress.com/2010/05/21/sharepoint-2010-create-page-layout-based-on-a-custom-content-type-in-visual-studio-2010/ http://www.rkinteractive.com/blogs/SoftwareDevelopment/post/2012/01/06/Creating-Custom-Content-Types-and-Page-Layouts-in-Visual-Studio-2010.aspx http://www.c-sharpcorner.com/Forums/Thread/182458/how-to-create-page-layout-in-sharepoint-2010-using-visual-st.aspx
First, open Visual Studio and create a new C# project, using the "Empty SharePoint Project" template, listed under the SharePoint 2010 project templates. For this example, we'll name our project "MyCustomPageLayout".
Click "Finish" to wire up your solution to your particular SharePoint site.
Content Type:
First thing to do is to define a content type.
I will call my Content Type: PicturePageContentType To do this: -
- Go to: Site Settings –> Site content types
- Next, click Create
In the following screen you insert information about the content type.
An import thing to do is let it inherit from the right parent content type.
This needs to be from the group: Publishing Content Types and the parent needs to be Page.
So far nothing special, next I added some non existing columns.
On the following page click Add from new site column.
Define in the screen the follows up the columns that you would like to add to the your content type (Page Layout in the end).
After you added all the columns you needed you can overview it when you’re looking at you content type. You’ll see that I added Page Content, this was one from the already existing site columns.
<Field ID="{7169882F-9B0C-4EA8-A096-9822C720D3BB}" Name="PageContent" DisplayName="PageContent" Type="HTML" RichText="TRUE" RichTextMode="FullHtml" /> <Field ID="{ECD16AAB-CEA3-4D0A-9F48-16F59B29C73A}" Name="PageImage" DisplayName="PageImage" Type="Image" RichText="true" />
As with SharePoint 2007, we'll need to provision our Page Layouts to our SharePoint Site Collection Master Page Gallery by using a "Module" element. To do this, right click on the Project and say you want to add a new item. Select "Module" from the list of SharePoint 2010 items.
By default, the module contains a sample text file you, so you can see how the Module deploys a file to SharePoint. However, we don't need it, so we'll delete Sample.txt. Next, we need to wire up our module to point to the URL of the Master Page Gallery, so we'll add a "Url" attribute to the Module node. Our Elements.xml file should now contain this XML:
<?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Module Name="masterpage" Url="_catalogs/masterpage">
</Module>
</Elements> <Module Name="masterpage" Url="_catalogs/masterpage"> </Module> </Elements>
Next, we're going to dop our new Page Layout file into the Module. To do thhis, we'll right-click on the "masterpage" module in the Visual Studio explorer and select "Add new item". We're once again presented with the "Add New Item" dialog. If we were to select "Application Page" from the SharePoint 2010 menu, we'd get a code-behind page in addition to our ASPX page, which we don't want. Since all we want to provision is markup (and not code), we're going to use a shortcut. Select the "General" node and select "Text File" from the list of items. However, name the file "MyCustomPageLayout.aspx". Add your Page Layout markup into your MyCustomPageLayout.aspx page.
You can do it how I do it, which is to create a new Page Layout in SharePoint designer,
Now, we need to add the code for PageLayout1.aspx. It's easier to design for the page first in SharePoint designer and then cop the code over.
So let's open SharePoint designer to the site you are developing on. Select "Page Layouts" under Site Objects.
In the ribbon click "New Page Layout". In the dialog box select Custom Content Types and ContentType1. Enter a URL Name and Title
In the Toolbox, under SharePointControls, Server Controls, Content Fields you should see PageContent and PageImage. Drag these two fields onto the page in the "PlaceHolderMain" content area so it looks like this Once again,
the FieldName values most likely won't match yours since that's a guid generated by the system. We will make two changes before we copy the code over to our project. Instead of leaving the guid for the field names we will change the FieldName to the actual names of the fields -- PageContent and PageImage so the code will be
<PublishingWebControls:RichImageField FieldName="PageImage" runat="server"></PublishingWebControls:RichImageField><PublishingWebControls:RichHtmlField FieldName="PageContent" runat="server"></PublishingWebControls:RichHtmlField>
Also, in the Page directive at the top of the page get rid of the following text: meta:webpartpageexpansion="full" meta:progid="SharePoint.WebPartPage.Document"
Take the code from the DesignPageLayout and copy it over to the PageLayout1.aspx page in your project.
then copying the code to Visual Studio. However, DO NOT FORGET to remove the attributes in the Page Directive at the top of the page that SharePoint Designer adds, that look like this:
meta:webpartpageexpansion="full"
meta:progid="SharePoint.WebPartPage.Document"
If you don't forget to remove those items from the Page directive, SharePoint will think your pages have been customized, even though they were deployed via a Feature.
Next, we'll need to update the Module's Elements.xml file to tell SharePoint what to do with the new Page Layout.
The first thing we'll need to do is to update the "Url" property of the File element, by removing the "masterpage/" prefix fromt the Url. (Since we already specified in the Module element that we're deploying the Page Layout to the "masterpages" library, if we left the "masterpages/" part of the Url on the file, SharePoint would try to provision our Page Layout into a library called "masterpages" inside the existing "masterpages" library! We don't want that!) Your new File element should look like this:
<File
Path="masterpage\MyCustomPageLayout.aspx"
Url="MyCustomPageLayout.aspx" />
<File Path="masterpage\MyCustomPageLayout.aspx" Url="MyCustomPageLayout.aspx" Type="GhostableInLibrary"> <Property Name="Title" Value="My Custom Page Layout" /> <Property Name="ContentType" Value="$Resources:cmscore,contenttype_pagelayout_name;" /> <Property Name="PublishingPreviewImage" Value="~SiteCollection/_catalogs/masterpage/$Resources:core,Culture;/Preview Images/CustomPageLayout.png, ~SiteCollection/_catalogs/masterpage/$Resources:core,Culture;/Preview Images/CustomPageLayout.png" /> <Property Name="PublishingAssociatedContentType" Value=";#ContentTypeName;#0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF3900242457EFB8B24247815D688C526CD44D;#" /> </File>
<Module Name="Previews Images" Url="_catalogs/masterpage/$Resources:core,Culture;/Preview Images">
<File Path="Preview Images\CustomPageLayout.png" Url="CustomPageLayout.png" Type="GhostableInLibrary"> <Property Name="Title" Value="Custom Page Layout Preview Image" /> </File> </Module>
To deploy our new Solution Package to our Sandboxed Site, we'll go to the "Build" menu in Visual Studio, and select "Deploy MyCustomPageLayout".
This will assemble the Solution Package, deploy the Solution Package to the Sandbox, then activate the Sandboxed feature. If we browse to our Master Page Library, we'll now see our new Page Layout. Note that, unlike SharePoint 2007, our Page Layout will appear checked out by default, if we haven't modified any of the approval or check-out settings of the out of the Master Page Gallery. We'll need to check it in and approve it for it to be available to us.
Refrences: Links :
http://rburgundy.wordpress.com/2010/05/21/sharepoint-2010-create-page-layout-based-on-a-custom-content-type-in-visual-studio-2010/ http://www.rkinteractive.com/blogs/SoftwareDevelopment/post/2012/01/06/Creating-Custom-Content-Types-and-Page-Layouts-in-Visual-Studio-2010.aspx http://www.c-sharpcorner.com/Forums/Thread/182458/how-to-create-page-layout-in-sharepoint-2010-using-visual-st.aspx
No comments:
Post a Comment